OBJAVITE

Solarni regulator - kontroler punjenja 20A 12v/24v

Solarni regulator - kontroler punjenja 20A 12v/24v

Kategorija

Osnovne informacije

Cijena

40 KM

Količina

6

Stanje

Novo

Obnovljen

Prije 3 dana

OLX brza dostava

ZAPOČNI NARUDŽBU

Zamjena

Korisnik ne želi zamjenu za ovaj artikal.

Ostale informacije

Vrsta oglasa
Prodaja
Datum objave
OLX ID
30273098
Broj pregleda
216

Solarni regulator - kontroler punjenja 20A 12v/24v



Kratki opis

Solarni regulator sa LCD i USB punjačem mobitela, 20A 12v/24v

Detaljni opis

Solarni regulator sa LCD i USB punjačem mobitela 20A 12v/24v

sistem na 12v 260w panela, na 24v 520w panela

cijena 40km,  kontakt 061/133-022

dostava brzom poštom 9km

---------------------------------------------

Product Deion:
    Rated Voltage: 12V 24V Auto
    Application: Solar System Controller
    AUTO DETECT – AGM, GEL, OPEN
    Current: 20A
    With Timer and light sensor,it could work for solar light system.
    Only For off-Grid PV Solar System.
    For 12V Pv System: 260W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
    For 24V Pv System: 520W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
    Current Types: 20A

SAFETY INSTRUCTIONS:

    1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
    2.The battery cable should be as short as possible to minimize loss.
    3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL
    it is not suited for nickel metal hydride, lithium ions or other batteries.
    4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

FEATURES:

    1.Build-in industrial micro controller.
    2.One-key setting,digital display,auto memory function.
    3.Fully 4-stage PWM charge management.
    4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
    5.Dual mosfet Reverse current protection ,low heat production.

SYSTEM CONNECTION:

    There could be some slight differences in the color tone of the pictures and the actual item.
    1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
    2.Connect the photovoltaic module to the regulator – plus and minus.
    3. Connect the consumer to the charge regulator – plus and minus.
    The reverse order applies when deinstalling!
    An improper sequence order can damage the controller!