OBJAVITE

Regulator vlage i temperature SHT2010 Touch 220V AC

Regulator vlage i temperature SHT2010 Touch 220V AC

Kategorija

Osnovne informacije

Cijena

65 KM

Količina

0

Stanje

Novo

Obnovljen

06.07.2021 u 17:26

OLX brza dostava

ZAPOČNI NARUDŽBU

Detaljne informacije

Radni raspon (℃)
-50 do +120

Ostale informacije

Vrsta oglasa
Prodaja
Datum objave
OLX ID
29194870
Obnovljen
06.07.2021 u 17:26
Broj pregleda
853

Zamjena

Korisnik ne želi zamjenu za ovaj artikal.

Regulator vlage i temperature SHT2010 Touch 220V AC



Kratki opis

Izuzetno kvalitetan uredaj za regulaciju temperature i vlaznosti. Za sve namjene gdje je potrebno precizno održati vlagu i temperaturu.

Detaljni opis

Product Name: Temperature and Humidity Controller Product Model: SHT2010
Power supply voltage: AC 110~230V Power supply frequency: 50/60Hz
Temperature measurement range: -20~60℃ Humidity measurement range: 0%~100%RH
Temperature measurement accuracy: 0.3℃ Humidity measurement accuracy: 3%
Output control: Relay control Control circuit current: MAX 10A

Setting essentials 1: Start value Setting essentials 2: Start value>Stop value (the program automatically determines that the working mode is cooling/dehumidification mode).
Setting essentials 3: In the setting mode, press the button for 5 seconds without operation, and it will automatically return to the normal display state.
Heating/cooling mode setting:
Setting (start-up temperature): Long press the ▲ button, the start-up temperature flashes, and set the start-up temperature value through the ▲▼ button.
Setting (stop temperature): Long press the ▼ button to stop the temperature flashing, and set the stop temperature value through the ▲▼ button.

Heating use case: control the water heater, stop heating to 65℃, and start heating again when the temperature drops to 50℃;
Step 1: Long press the ▲ button for 3 seconds to start the temperature flashing, and set the starting temperature to 50°C by pressing the ▲▼ button;
Step 2: Long press the ▼ button for 3 seconds to stop the temperature flashing, and set the stop temperature to 65°C through the ▲▼ button, and the setting is complete;
Note: heating working mode, start temperature Refrigeration use case: Used in a breeding farm, the fan ventilation stops at 26℃, and the temperature rises to 30℃ to restart ventilation;
Step 1: Press and hold the ▲ button for 3 seconds to start the temperature flashing, and set the starting temperature to 30℃ by pressing the ▲▼ button;
Step 2: Long press the ▼ button for 3 seconds to stop the temperature flashing, use the ▲▼ button to set the stop temperature to 26℃, the setting is complete;
Note: Cooling working mode, start temperature>stop temperature;

Humidification/dehumidification mode setting:
Setting (Start Humidity): Long press the △ key to start the humidity value flashing, and set the start humidity value through the △▽ key. Setting [Stop Humidity]: Long press the △ key to stop the humidity value flashing, and set the stop humidity through the △▽ key value.

Humidification use case: fresh supermarket humidification, control the humidifier to start humidifying at 50%RH, and stop humidifying at 80%RH;
Step 1: Press and hold the △ key for 3 seconds to start the humidity value flashing, and set the start humidity to 50%RH through the △▽ key;
Step 2: Long press the ▽ key for 3 seconds to stop the humidity value flashing, and set the stop humidity to 80%RH by the △▽ key, and the setting is complete;
Note: Humidification working mode, start humidity Dehumidification use case: workshop control exhaust air dehumidification system, humidity 70%RH starts dehumidification, humidity 40%RH stops dehumidification;
Step 1: Press and hold the △ key for 3 seconds to start the humidity value flashing, and set the starting humidity to 40%RH through the △▽ key;
Step 2: Long press the ▽ key for 3 seconds to stop the humidity value flashing, and set the stop humidity to 70%RH through the △▽ key, and the setting is complete;
Note: Dehumidification working mode, start humidity>stop humidity;

Temperature correction:
First press the ▲ key and hold, then press the ▼ key for 3 seconds to start the temperature number flashing, and set the start temperature correction value through the ▲▼ key;

Humidity correction:
First press the ▽ key and hold, then press the △ key for 3 seconds to start the humidity number flashing, and set the start humidity correction value through the △▽ key;

Restore factory settings:
First press the ▼ key and hold, and then press the △ key for 3 seconds to start to restore the factory setting mode;

※If the temperature and humidity display LLL, please confirm whether the wiring of the SHT20 digital temperature and humidity sensor is correct and whether the connection is bad, you can try to re-wire.

Ova stranica koristi kolačiće (eng. Cookies) za pružanje boljeg korisničkog iskustva. Nastavkom korištenja OLX.ba stranice prihvatate uvjete korištenja.