SOLAR CHARGE Controller 2x USB 12/24V 30A

Novo u kutiji....

Specifications:

• Rated Voltage: 12V 24V Auto

• Current: 10A/20A/30A 　

• With Timer and light sensor, it could work for solar light system.

• Only For off-Grid PV Solar System.

• For 10A 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage

• For 10A 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage 

Safety Instructions:

1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation;

2.The battery cable should be as short as possible to minimize loss;

3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries;

4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

Features:

• Built-in industrial micro controller;

• One-key setting, digital display, auto memory function;

• Fully 4-stage PWM charge management;

• 4Built-in short-circuit protections, open-circuit protections, reverse protections, over-load protections;

• 5Dual mosfet reverse current protections, low heat productions. 　

System Connection:

1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.

2.Connect the photovoltaic module to the regulator - plus and minus.

3. Connect the consumer to the charge regulator - plus and minus. 　

• The reverse order applies when deinstalling!

• An improper sequence order can damage the controller!

• Size: 133x70x32mm/5.2x2.7x1.3"

Note:

• Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid

Package includes:

• 1x Solar panels Battery Charge Controller

• 1 x User Manual

SOLAR CHARGE Controller 2x USB 12/24V 30A

Detaljni opis