OBJAVITE

Termostat digitalni -60 do +500 12V/220V K Type senzor

Termostat digitalni -60 do +500 12V/220V K Type senzor

Kategorija

Osnovne informacije

Cijena

35 KM

Količina

2

Stanje

Novo

Obnovljen

Prije 2 dana

OLX brza dostava

ZAPOČNI NARUDŽBU

Detaljne informacije

Radni raspon (℃)
-60 do + 500
ºF i ºC prikaz

Ostale informacije

Vrsta oglasa
Prodaja
Datum objave
OLX ID
28350553
Obnovljen
Prije 2 dana
Broj pregleda
735

Zamjena

Korisnik ne želi zamjenu za ovaj artikal.

Termostat digitalni -60 do +500 12V/220V K Type senzor



Kratki opis

Digitalni termostat - mikroracunar -60 do + 500 stepeni celzijusa. Moguće priključenje svih uređaja AC 220V ili DC svih napona.DC 12V Digital Temperature Controller Sensor Thermostat K Type Thermocouple Senzor

Detaljni opis

Deion:
K-type thermo thermostat function: The product has a total of four buttons, plus, minus, SET (set button), reset button. There are two sets of digital tubes to display the actual temperature and the set temperature, respectively. All parameters are automatically saved after 5s.
Specifications:
Product name: High temperature K type thermo thermostat
Power supply:  12V DC 
Temperature control range: -60 ℃ ~ 500 ℃
Cable length: 50cm
Temperature measurement accuracy: 1 ℃
Resolution: 0.1 ° C
Refresh frequency: 0.5 S.
Input: type K thermocouple
Output: A 10A relay
Opening size: 74mm (length) * 39mm (width)
 
Instructions:
Red digital tube: actual temperature,
Blue digital tube: set temperature
Press the button to increase: increase the set temperature.
Press the key to decrease: decrease the set temperature.
Restore factory settings: press and hold the plus and minus buttons for 5 seconds or more to restore the original setting data.
Set button (SET):
1. Press SET briefly to raise the temperature by 50 ° C each time. Users can first press SET to quickly set the temperature near the preset temperature, and then set the temperature to the preset temperature by adding or subtracting keys.
2. Press and hold SET to enter the parameter setting option. There are several groups of parameters P00 ~ P05 for users to set. After entering the parameter interface, short press SET can switch P00 ~ P05. Set the appropriate data by pressing the plus or minus key under the appropriate parameters. After setting, the system will automatically remember the data and return to the display interface.
P00: H heating mode / C cooling mode
P01: temperature difference backlash (0 ~ 500° C )
P02: temperature correction (-10 ~ 10 ° C )
P03: Maximum temperature alarm value (500 ° C )
P04: minimum temperature alarm value (-60 ° C )
P05: data lock (ON / OFF)
Application 1: This thermostat can be widely used in boiler water temperature control, water dispenser water temperature control and automatic cabinet water temperature control.
Application 2: This thermostat can be used for printer equipment, hatch control, and intelligent control of refrigerator air conditioners.
Application 3: This temperature can be widely used in the fields of intelligent agriculture control, greenhouse temperature control, and automatic irrigation.
Package Included:
1 x DC 12V digital thermostat temperature controller 
1 x sensor probe cable

Ova stranica koristi kolačiće (eng. Cookies) za pružanje boljeg korisničkog iskustva. Nastavkom korištenja OLX.ba stranice prihvatate uvjete korištenja.